The LXA IOBus 4DO-3DI-3AI extends an IOBus network by four digital outputs, three digital inputs and three analog inputs.
The digital outputs are implemented using solid state relais and allow the galvanically isolated switching of very small loads. Exemplary use cases are the simulation of button presses or the setting/resetting of jumper connections to trigger a system reset or select boot modes.
The digital inputs are also implemented using solid state relais and can for example be used to provide binary feedback to your test automation system to determine if a test was successful.
The analog inputs are non-isolated and may for example be used to monitor supply voltages. This can for example be used to ensure that the system has returned to a known good state after the previous test run.
Scope of delivery:
This product is delivered as kit
- 1x PCB with soldered SMD components
- All needed THT components, consisting of
- 1x button
- 1x D-SUB 9, female
- 2x 2.54 mm 4 PIN Socket
- 2x skirting and cable housings
- 1x Datasheet (de, en)
- ESD protective box
|LXA IOBus Server||https://github.com/linux-automation/lxa-iobus|
|Product line||LXA IOBus|
|Controlled via||CANopen inspired|
|Operating System||Linux with Kernel 4.* or higher|
|Required Software||Python 3.*|
|CE compliance||not tested|
|FCC compliance||not tested|
|UKCA compliance||not tested|
|Country of Origin||Germany|
LXA IOBus 4DO-3DI-3AI
- Brand: Linux Automation GmbH
- Product Code: lxatac_can_io-D02-R01-V01-C00
- Availability: In Stock
- Ex Tax: 125.00€